双级染料激光放大器泵浦能量分配的数值研究

用染料激光放大器的横向稳态泵浦理论，对不同的入射光能量选择不同的增益计算方法，研究了双级染料放大器的泵浦能量分配比例、泵浦光总能量和信号光能量大小对激光增益的影响。计算结果表明，对于其他参数确定的放大系统，存在着最佳的泵浦能量分配比例，可获得最大增益输出。通过自编程序的计算，可方便地找出特定系统泵浦能量分配比例的最佳值。     

逻辑程序的一种并行执行模型

本文基于静态相关性分析和动态调整相结合的方法，提出了一种逻辑程序的执行模型，它不仅开发了“与“并行，同进也开发了一定的“或“并行，从而有效地加速了逻辑程序的执行。     

提高曲面近似展开精度的方法与实现

通过对不可展曲面近似展开精度的研究，提出了根据曲面曲率的大小对曲面自动进行网格划分，通过对综合展开误差数据场进行数据拟合来选取最优展开基点，基于空间曲面与其展开图间近似的等距变换关系进行展开样形的误差矫正等3种方法，这几种方法的实现在不同程度上有效地减小了曲面的近似展开误差，提高了曲面的近似展开精度。     

GIS中矢量图形的结构分析与VC++中的实现

简要讨论了GIS各类矢量图形元素间的空间拓朴结构及基位置关系 ,并用VC 6 . 0及MFC具体分析了圆弧与多边形区域的相交关系及实现。为利用VC开发专用图形软件提供了有用帮助。     

Transient operation of a catalytic liquid-liquid plug flow reactor for kinetics measurements

A centrifugal partition chromatograph (CPC) was used as a liquid-liquid catalytic reactor for the isomerisation of hexen-3-ol into ethylpropylketone with a water soluble rhodium catalyst. Global mass transfer coefficients were measured and shown to depend on both the nature of the solute and the flow rate. Liquid-liquid partition isotherms were also determined with the CPC using elution chromatography. Finally, a reactor model was derived to account for the experimental results obtained both under stationary and transient (pulse) conditions. A parameter sensitivity evaluation is also presented.     

转移法色交换

将图Ｇ的着色由一种变为中一种，通常用Ｋｅｍｐｅ法以交换。但是，对于某些情况，用此法无效。针对这个问题，本文提出了一种转移法色交换，它适用于平面图着色，方法直观，清晰且有效。     

单模光纤的传输衰减随温度变化的研究

本文从实验上测量了单模石英光纤在－50～120℃范围内的损耗。随着温度升高，光纤的损耗随之降低，在常温附近达到最小。其后损耗随着温度的继续升高而增加。损耗的变化主要是由于杂质的吸收和微弯损耗。本文对杂质的吸收以及微弯损耗进行了数值模拟，并且从理论上定性地解释了损耗对温度的依赖关系。     

Energy minimization and design for testability

The problem of fault detection in general combinational circuits is NP-complete. The only previous result on identifying easily testable circuits is due to Fujiwara who gave a polynomial time algorithm for detecting any single stuck fault inK-bounded circuits. Such circuits may only contain logic blocks with no more thanK input lines and the blocks are so connected that there is no reconvergent fanout among them. We introduce a new class of combinational circuits called the (k, K)-circuits and present a polynomial time algorithm to detect any single or multiple stuck fault in such circuits. We represent the circuit as an undirected graphG with a vertex for each gate and an edge between a pair of vertices whenever the corresponding gates have a connection. For a (k, K)-circuit,G is a subgraph of ak-tree, which, by definition, cannot have a clique of size greater thank+1. Basically, this is a restriction on gate interconnections rather than on the function of gates comprising the circuit. The (k, K)-circuits are a generalization of Fujiwara'sK-bounded circuits. Using the bidirectional neural network model of the circuit and the energy function minimization formulation of the fault detection problem, we present a test generation algorithm for single and multiple faults in (k, K)-circuits. This polynomial time aggorithm minimizes the energy function by recursively eliminating the variables.     

Mesh‐independent p‐orthotropic enrichment using the generalized finite element method

This paper is aimed at presenting a simple yet effective procedure to implement a mesh‐independent p‐orthotropic enrichment in the generalized finite element method. The procedure is based on the observation that shape functions used in the GFEM can be constructed from polynomials defined in any co‐ordinate system regardless of the underlying mesh or type of element used. Numerical examples where the solution possesses boundary or internal layers are solved on coarse tetrahedral meshes with isotropic and the proposed p‐orthotropic enrichment. Copyright © 2002 John Wiley & Sons, Ltd.